Apex Equipment Inc.

Information

Engine brand Yanmar
Engine model 4TNV98C-NMS2
Motor Type Radial Piston
Gross Power / Power 69.30 Hp @ 2500 rpm
Net Power 2500 rpm
Max. torque 178 ft/lbs
Battery voltage 12 V
Cold Cranking Amps at Temperature (CCA) 950 A
Alternator - Voltage / Ampere 12 V / 100 A

Overall Operating Height - Fully Raised h27 158 in
Height to Hinge Pin - Fully Raised h28 120 in
Dump reach - Full height r6 25 in
Dump angle at full height a5 39 °
Dump Height - Fully Raised h29 92 in
Maximum Rollback Angle - Fully Raised a4 98 °
Overall Height to top of ROPS h17 78 in
Overall length with bucket l16 126 in
Overall Length without Bucket l1 94 in
Specified Height h31 64 in
Reach at Specified Height r4 22 in
Dump angle at specified height a17 73 °
Carry Position d5 8 in
Maximum Rollback Angle at Carry Position a14 28 °
Digging Position h32 2 in
Angle of Departure with STD Counterweight 28 °
Ground clearance m4 7 in
Track gauge b10 53 in
Track Shoe Width b20 13 in
Crawler base y2 50 in
Overall width less bucket b1 66 in
Bucket Width e1 66 in
Clearance Radius - Front with Bucket b18 78 in
Angle of Approach a3 90 °
Grouser Height 0.98 in
Track Type / Track Rollers / Roller Type Rubber / 3 / Steel

Ground Speed - Single Speed 7 mph
Ground Speed - Two Speed 10 mph
Drawbar Pull/Tractive Effort 9579 lb
Bucket Breakout - Tilt Cylinder 4231 lb
Bucket Breakout - Lift Cylinder 5060 lb